Vibration Sensor module

1)Objective:

In this project, we will connect Arduino with Vibration sensor and LED. When no vibration is detected, Vibration sensor output is 0 (low voltage),otherwise its output is 1(high voltage)。 If Arduino get 0 (no vibration) from vibration sensor it will turn on green LED and turn off Red LED. If Arduino get 1 from vibration sensor, it will turn on Red LED and turn off green LED.

2)Parts and Devices:

1 x  arduino UNO R3

1 x Vibration Sensor module

1 x Red LED

1 x USB cable

Jumper wires

3)Circuit graph:

vibration_sensor_bb

4)sample code download link:

vibration_sensor Arduino code download here

Unzip file downloaded from above link and load the code into Arduino IDE.

5)Result:

When sensor is still, Green light is on and Red light is off. When you shake the sensor, red LED will flash and green LED is off. See following pictures:

IMG_20160815_164254 IMG_20160815_164314

Posted in Arduino Parts & Projects

Leave a Reply

WordPress spam blocked by CleanTalk.