Blog Archives

Arduino and Raspberry Pi DIY Kit List

Arduino IOT Lesson 14: Send signal from Buzzer to Arduino

1 Overview In this lesson, we'll introduce how to send signal from buzzer to Arduino, Further more the Cayenne IOT system enable you to receive notifications when the buzzer alarm. 2 Hardware Preparation Quantity UNO R3 board 1 W5500 Ethernet

Posted in Arduino/Raspi Kit, Buzzer, IOT

Arduino IOT Lesson 15:Remote control a relay switch from your phone

1 Overview In this lesson, we'll learn how remote control a relay switch. 2 Hardware Preparation Quantity UNO R3 board 1 W5500 Ethernet shield 1 USB cable 1 Relay 1 Jumper wires several Breadboard 1 3 Hardware connection Connect the

Posted in Arduino/Raspi Kit, IOT

Arduino IOT Lesson 12: Using smart phone to monitor a PIR motion sensor HC-SR501

1 Overview In this lesson, we'll learn how to monitor the HC-SR501 PIR motion sensor through Cayenne IOT platform. 2 Hardware Preparation Quantity UNO R3 Board 1 W5500 Ethernet shield 1 USB cable 1 HC-SR501 PIR motion sensor 1 Jumper

Posted in Arduino/Raspi Kit, IOT

Arduino IOT Lesson 13: Noise Monitor IoT project

1 Overview In the lesson, we'll show how to use sound Sensor detect the sound intensity of the environment through Cayenne IOT Platform. This sound sensor is used to detect whether there’s sound surround or not, please don’t use the

Posted in Arduino/Raspi Kit, IOT

Arduino IOT Lesson 6: BMP180 Digital Barometric Pressure Sensor Module

1 Overview In this lesson, we'll show how to remote monitor the enviroment temperature and pressure value from Cayenne IOT platfrom. 2 Hareware preparation Quantity Osoyoo UNO Board 1 W5500 Ethernet shield 1 USB cable 1 BMP180 1 Jumper wires

Posted in Arduino/Raspi Kit, IOT

Arduino IOT Lesson 3: Remote control a LED

1, Overview In this lesson, we'll learn how to remote turn on/off a LED. the parts needed for this lesson as followed: Parts needed  quantity Arduino UNO 1 W5500 Ethernet Shield 1 USB线 1 LED 1 200 ohm resistor 1

Posted in Arduino/Raspi Kit, IOT

Arduino IOT Lesson 2: Set up Arduino

Before you can manage your Arduino device using the online dashboard, you must setup your device and install the Cayenne Arduino Library onto the device. The hardware and software needed for this lesson as followed: 1x Osoyoo UNO R3 Board

Posted in Arduino/Raspi Kit, IOT

Aruino IOT Lesson 1: Cayenne IOT platform Introduction

This guide will help you to understand how to get started using Cayenne and give you the most comprehensive overview of all the features. Cayenne is the world’s first drag and drop IoT project builder that empowers developers, designers and

Posted in Arduino Parts & Projects, Arduino/Raspi Kit, IOT

Arduino IOT starter kit

Posted in Arduino/Raspi Kit, IOT

Osoyoo NodeMCU IOT programming learning starter kit

Internet of Things (IOT), described by wikipedia, is  "the infrastructure of the information society".  Learning IOT technology not only helps student make many fancy projects in science fair, hackathon and  homeworks, but also prepare  the necessary knowledge base for their future career path in

Posted in Arduino/Raspi Kit, Tutorial & eBook