Objective

In this project, we will use OSOYOO Basic board　to drive 16 x 16 LED matrix to display motion and static graphics.

7

Parts

1 x OSOYOO Basic board

2 x 16*16 LED matrix

1 x USB cable

Jumper wires

Circuit Graph

1)Single matrix board

OSOYOO Basic board
16*16 LED Matrix
5V
+5V
GND
GND
D5
A
D4
B
D3
C
D2
D
D6
G
D7
DI
D8
CLK
D9
LAT

3

multiple matrix boards:
If you want to cascading connect multiple  matrix boards, please connect CN2-out pin of the first board to CN1-in pin of next board. Make sure  VCC of two boards should be connected and  so do the gound pins.

2

Download Sample code from following link

osoyoo.com/driver/16X16matrix.zip

Unzip above file  and load the code into Arduino IDe. you can display motion and static graphs on the matrix boards. The codes are quite straight forward, you can change the display content in the code and customize your own graphics.
1

video：

https://osoyoo.com/driver/arduino10.gif

https://osoyoo.com/driver/arduiino_11.gif

others:

parts connection graph：16-16

chip data sheet：74HC138 74HC595