Authorized Online Retailers

Buy from US Buy from UK Buy from DE Buy from IT Buy from FR Buy from ES Buy from JP

Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, ST corporation production.Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.

To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.

Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability and stability.

This module has a built-in 5v power supply, when the driving voltage is 7v-24v, this supply is suitable for power supply.
DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available.

Description
Dimensions: 73x45x25mm

Features:
L298N Dual H Bridge IC
5V Linear Regulator
Voltage Regulator IC
Interface Type:dual molex plug and pinout

Power Output: 5V 2.5A USB
DC Motor (A and B): dual molex plug *4
Logic Input: EnableA/IN1/IN2/IN3/IN4/EnableB
12V Jumper Remover If Vs.>12v
Power Input: dual molex plug
DC Voltage Meter Port: VT/VCC/GND

Application:
Raspberry Pi Robot Car
Arduino Robot Car