OSOYOO V3 High Resolution 12MegaPixel (4608 x 2592) Camera uses Sony IMX708 module and is fully compatible with Official Raspberry Pi Module 3 Camera.
Configuration:
In order to make the V3 Camera working in Raspberry, we need to change the system config file.
Please run following command in Raspberry Pi terminal:
sudo nano /boot/firmware/config.txt
Above command will open a nano editor, please use Ctrl W command to find the following line:
camera-auto-detect=1
then change the value 1 to 0 and make above line as following:
camera-auto-detect=0Then we need to add following line to the bottom of the config.txt file:dtoverlay=imx705Press Ctrl X and save above change.
Now you can restart the Raspberry Pi board and run following command to test OSOYOO v3 camera:
libcamera-still -o test.jpgAfter running above command, you will see the camera capture a picture and save it to test.jpg file.
It will also show the resolution of the picture is 4608 x 2592
DownLoad Url osoyoo.com