Step 3) Run the mBlock PC software by double click the lovely Panda icon. you will see mBlock UI as following picture. Please delete the default device CyberPi by click the cross in the red circle.
Step 4: Drag and Drop osoyoo_uno_mext file(downloaded in Step 2) to mBlock software as following:
Now you will see a new device firmware in mBlock, see following picture:
Now mBlock software and OSOYOO_UNO device firmware have been successfully installed in our PC!
Now we will show you how to use blocks to make our Oscillating Pedestal Fan into reality. Step 1: Click Control, then Drag and drop Forever block to programming area as following:
Step 2: Click Events, add when Arduino Uno starts upblock to the top:
Step 2: Click Action, add Backward left speed 100 to Right speed 100 blocks to forever block as following:
Then change the Backward left speed 100 to Right speed 100 to Backward left speed 100 to Right speed 0.
Now all the programming blocks have been completed!
Upload the program to OSOYOO basic board
1)you need connect your OSOYOO basic board to your PC with a USB cable first. Then click the Connect button in the bottom of the mBlock software, you will see a USB window pop up,
2) select Show all connectable device check box , then a device drop-down menu will show up,
3) select your port from device drop-down menu
4) click Connect button to connect your PC to OSOYOO basic board:
5)After you PC is connected to OSOYOO basic board, please click Upload button in the bottom of your software, then the code will be uploaded to OSOYOO basic board:
Now turn on the power switch in the Magic board, the OSOYOO basic board will start to work. Throw two balls in this toy, the motor will rotate to make the ball rotate together.
