1)Objective:
In this project, we will connect Arduino with Vibration sensor and LED. When no vibration is detected, Vibration sensor output is 0 (low voltage),otherwise its output is 1(high voltage)。 If Arduino get 0 (no vibration) from vibration sensor it will turn on green LED and turn off Red LED. If Arduino get 1 from vibration sensor, it will turn on Red LED and turn off green LED.
2)Parts and Devices:
1 x Arduino UNO R3
1 x Vibration Sensor module
1 x Red LED
1 x USB cable
Jumper wires
3)Circuit graph:
4)sample code download link:
vibration_sensor Arduino code download here
Unzip file downloaded from above link and load the code into Arduino IDE.
5)Result:
When sensor is still, Green light is on and Red light is off. When you shake the sensor, red LED will flash and green LED is off. See following pictures:
DownLoad Url osoyoo.com