| Buy from US |
Buy from UK |
Buy from DE |
Buy from IT |
Buy from FR |
Buy from ES |
ここでご購入を！ |
 |
 |
 |
 |
 |
 |
 |
Lilypad LED
This is an assortment pack of five colors LilyPad LEDs for arduino that are not attached to one another, letting you can use the different color LEDs apart at your leisure to sew into clothing or whatever else you can dream up.
LilyPad LED for Arduino is a wearable e-textile technology and Each LilyPad piece for arduino was creatively designed with large sew tabs to allow them to be sewn into fabric. Various input, output, power and sensor boards are available.
Colors: 5x pink/5x red/5x yellow/5x blue/5x Green/5x white
Demension：25x13x1.5mm x 6 colors
Lilypad coin battery holder
Lilypad Battery Holder: Each holds a single coin battery (CR2032 or similar) is integrated On / Off Switch,easy for turning off to save batteries.
This LilyPad Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as on the LilyPad Slide Switch Board, so it’s not easy to accidentally turn off or on.
Just like the original Coin Cell Battery Holder, this simple board holds a 20mm coin cell battery (such as a CR2032) and gives you four connection points (two positive and two negative) for sewing into your project. Additionally, we have strengthened the battery connector on this board in order to ensure that it doesn’t accidentally pop off.
We listened to our customers’ suggestions and chose a combination of 30 LED beads and a battery holder. The combination of 5 LilyPad battery holders and 30 LED beads is perfect for various DIY projects in the creative field. This allows customers to experiment with electronic products using LilyPad components for fashion design, handicrafts, fabric art, and more.
Demension：33 x 3.1 x 1.5mm
