1

This is a great starter kit for raspberry pi 3 (2016 version). Unlike Arduino and other micro-computer board which works on 5V voltage, New 2016 Raspberry Pi 3 CPU and I/O ports work on 3.3V voltage and very sensitive to current change and overheat. In order to best protect your pi 3, you’better to connect the component with 3.3V GPIO (Note: For some sample projects, you need to connect 5V GPIO, pls follow our sample project to test your component.)

We also includes many common hardware components which are often used in Raspberry Pi/Arduino related DIY project.

To help beginners to easily study the Raspberry Pi hardware controlling, we designed many straight forward sample projects. All parts in these sample projects are in this kit which can save user a lot of money and time to do research. Each project has circuit graph, free sample code and video which can be easily understood.

Authorized Sellers:

AMAZON

AMAZON-jp

amzuk

Sample Projects List:

The Kit Package includes:

Item Photo Item Title Sample Project
s-l500 1 x Raspberry Pi/Arduino 8-Channel TTL Logic Level Converter
LACC2006AD-12 1 x Solderless Prototype Breadboard
breakout 1 x GPIO to Breadboard 40-pin breakout interface
LACC2006AD-31 40pin jumper wires (male to male 15cm)
LACC2006AD-33 2 x 8pin Jumper Wires (female to female 20cm)
LACC2006AD-24 LED (6 x Bright White, 6 x Red, 6 x Yellow, 6 x Green)  DIY ProjectTutorial
LACC2006ADx3 3 x Photoresistor(light sensor) DIY sample project
LACC2006AD-15 3 x Potentiometer(10kilohm adjustable resistor) DIY Project Tutorial
MCP3008 1 x A/D converter DIY Project Tutorial
LACC2006ADx5 5 x push buttons
EASM100600 1 x DHT11 Temperature/Humidity sensor DIY Project Tutorial
Digital-Motion-Sensor 1 x Motion sensor DIY Project Tutorial
mercury_tilt 1 x Tilt switch sensor DIY Project Tutorial
1602LCD 1 x I2C 1602 alphanumeric LCD DIY Project Tutorial
LACC2006AD-14 1 x servo motor DIY Project Tutorial
LACC2006AD-20 1 x Piezo Buzzer DIY Project Tutorial
BMP180 1 x BMP180 Pressure/Temperature Sensor DIY Project Tutorial
BMP180 1 x Relay DIY Project Tutorial
LACC2006AD-22 LACC2006AD-37 1 x Infrared Remote Controller and Receiver(VS1838B) DIY sample project
LACC2006AD-26 Resistors (200ohm x 20pcs, 1Kohm x 20pcs, 10Kohm x 20pcs,1Mohm x 5pcs) How to Read Resistor Color Code

Recommend raspberry pi 3 kit for testing and learning

  • AMAZON
  • AMAZON

11 Comments

  • terrylund says:

    There’s some info apparently missing at the end of the first paragraph on the page. The last sentence is truncated. It reads, “In order to best protect your pi 3….”

    What are we supposed to do to best protect our pi 3?

    • elaine says:

      thx for your notice.
      In order to best protect your pi 3, you’better to connect the component with 3.3V GPIO (Note: For some sample projects, you need to connect 5V GPIO, pls follow our sample project to test your component.)

  • tarmbrester says:

    Why did my kit contain 200ohm resistors instead of 220ohm that the projects call for?

  • ruggiero.guida says:

    Hi, do you have the datasheet for the photo resistor or its code? Thanks

  • Nk says:

    Raspberry Pi/Arduino 8-チャンネル TTLロジックレベル変換器の使い方を教えていただけないでしょうか?
    サンプルプロジェクトも無く行き詰っています。

    ・これは双方向ではなく、一方向(A to B)の変換のみであっていますでしょうか?

    ・変換機には、VCCAが2ピン、VCCBが2ピン、GNDが4ピン存在します。
     これは全て接続する必要がありますか?

    • admin says:

      sorry, i don’t know how to write Japanese. I use English to reply your question.
      1)The TTL Logic Level Converter showed in this kit is bi-directional. That means you can convert both from 3.3V signal to 5V signal and reversely from 5v to 3.3V
      2)please connect VCCA to 3.3V and VCCB to 5V, all A pins connect 3.3V devices and B pins to 5V devices.

      Hope this is clear
      日本語で説明します:
      1)このキットでのTTLロジックレベル変換器は双方向の物です。3.3vから5vへ変更できるし、5vから3.3vへ変更も大丈夫です。
      2)VCCAと3.3V、VCCBと5Vを接続してください。すべてのAピンと3.3V設備を接続し、すべてのBピンと5V設備を接続してくださいませ。

Leave a Reply

WordPress spam blocked by CleanTalk.
Bombax Theme designed by itx