In the previous course, we learned how to use the Osoyoo UNO Board and how to drive a DC motor. Now, we will use this kit to build a basic car robot. We will burn the pre-edited program to the UNO board. Once the robot gets power, it will go straight or rotate along a set trajectory.
Place the acrylic platform as shown below. Fix the UNO board and breadboard to the acrylic platform.
Turn the acrylic platform over and install the universal wheel.
Note: When installing the screw, the force should be uniform so as not to damage the acrylic plate.
Install the corresponding screws.
Fix the metal motor holders.
Fix DC motor to the acrylic platform.
Extend the wire from the hole in the motor。
Flip the acrylic platform and insert the L293D chip into the breadboard。
DownLoad Url osoyoo.com