Authorized Online Retailers

Buy from US	Buy from UK	Buy from DE	Buy from IT	Buy from FR	Buy from ES	ここでご購入を！

2020005300 (without mainboard)

Buy from US	Buy from UK	Buy from DE	Buy from IT	Buy from FR	Buy from ES	ここでご購入を！

The OSOYOO Robot Car is an educational robot based on Micro:bit programming. It features rich common robot functions including line tracking, obstacle avoiding, ultrasonic ranging, music playing Bluetooth/2.4G remote control, IR control, colorful light control, etc.

Thanks to the highly integrated modular design, it is very easy to assemble without soldering or wiring. After spending a few minutes of hardware installation time, you are almost ready, and our open source demo code is ready to help you get started quickly.

It integrates a cute robot, a starter kit and a board for experimentation. It aims to develop logical skills and abilities in the field of computer programming for young students.

• Easily plug your BBC micro:bit in and out using the edge connector
• Supports control of two DC motors
• Bluetooth app remote control
• 2.4G wireless control
• Support infrared tracking
• Infrared obstacle avoidance sensor
• Infrared sensor sensitivity adjustment potentiometer
• Ultrasonic sensor, distance detection
• Onboard buzzer to play music
• Colorful RGB lights, robot headlights
• Onboard 9v battery box, while supporting external DC power supply (6.5~18V DC)
• Onboard power switch
• Onboard power indicator, motor running indicator, infrared obstacle avoidance indicator
• Reserved PWM signal extension pins and servo extension pins

1. Micro:Bit connector: for easily connecting with the micro:bit
2. Ultrasonic sensor interface: use ultrasonic sensor to detect the distance, connect Trig to p14, connect Echo to P15.
3. Robot RGB headlights.
4. Infrared tracking adjustment potentiometer: Used to adjust the sensor sensitivity
5. RGB LED lights: colorful on board led, controlled by the P16 signal pin
6. Motor rotation indicator: These four indicator lights respectively show the rotation of the two motors
7. Passive buzzer: Connect to P0 signal pin
8. Infrared obstacle avoidance potentiometer: Used to adjust the sensor sensitivity
9. PWM expansion interface / Servos expansion interface
10. 9V battery box: Used to install 9v battery and power the circuit
11. Power Indicator
12. Infrared receiver: It is used to receive the infrared signal emitted by the infrared remote control, connected with the P3 pin
13. External DC power interface:When the 9v battery box is not used for power supply, input 6.5-18V DC power through this interface
14. Robot power switch:
15. RT9193-33: 3.3V voltage regulator, stable power supply for the micro:bit
16. AMS1117-5V 5V voltage regulator

1. N20 geared motor: reduction rate 1:50, 6V/300RPM
2. Infrared tracking sensor: reflective infrared photoelectric sensor, for line tracking.
3. Infrared obstacle avoidance sensor:  reflective infrared photoelectric sensor, for obstacle avoiding
4. L293DD DC motor driver chip: It lets you drive two DC motors with your Micro:bit board, controlling the speed and direction of each one independently.
5. PCA9685 chip: PWM control chip, I/O expander, I2C interface
6. Motor bracket
7. Rubber wheels
8. Spherical universal wheel