In this lesson, we will show how to use OSOYOO ESP8266 wifi Module and Basic board to work as Web Server and show “hello world!” message in browser.
|OSOYOO Wifi Module||Basic board|
You can download above circuit Fritzing file from https://osoyoo.com/driver/osoyoo-esp8266-module/lesson1/osoyoo-wifi-module-lesson1.fzz
Step A) Install latest IDE (If you have IDE version after 1.1.16, please skip this step).
Download IDE from https://www.arduino.cc/en/Main/Software?setlang=en, then install the software.
Step B)WifiESP Library is required to run OSOYOO ESP8266 shield sketch code. If you have installed this library, please skip this step.
WifiESP library can be downloaded from following link:
then in your IDE ->Sketch->Include Library->Add .ZIP Library and select the WiFiEsp-master.zip file you just downloaded, and upload it to Basic board.
Step C)Download and Edit esp8266-lesson1.ino file
Please download sketch from https://osoyoo.com/driver/wifi-iot/lesson1/esp8266-lesson1.zip and unzip the file and double click esp8266-lesson1.ino file, you can edit this file in IDE.
Step D) Open the IDE and choose corresponding board type and port type for you project.
Step E) IDE: Click file -> click Open -> choose code “esp8266-lesson1” and open it.
In the sketch, find following lines:
char ssid = "******"; // your network SSID (name) char pass = "******"; // your network password please replace the ****** with your correct wifi SSID and password, otherwise your project can not connect to Internet. not connect to Internet.
After loading the sketch to Basic board , open the serial monitor in the upper-right corner of IDE
You will see following message:
From the serial monitor , you can see the IP address of your UNO board in the read circle (in above example, our Basic board IP address is 192.168.50.116).
Then use your browser to visit the website http://192.168.50.116, you will see following result:
DownLoad Url osoyoo.com