|Buy from USA||Buy from UK||Buy from DE||Buy from IT||Buy from FR||Buy from ES||Buy from JP|
|Buy from US||Buy from UK||Buy from DE||Buy from IT||Buy from FR||Buy from ES||Buy from JP|
Because the product is upgraded, all received are the V2.0 version, please refer to the following tutorial:
Welcome to the first lesson of Osoyoo Model-3 Robot Learning Kit!
In this “Hello World” version lesson, we will install the most important framework of the robot car and program the car to do some simple movements. If you have passed the test movement of this lesson, it means OSOYOO basic board, motor control module, motors, batteries, chassis and wire connections between these parts are all functioning well.
As your experiments in future lessons are all based on the frame work of Lesson 1, it is very important to test the installation and sample code in this Lesson properly.
|Sensor Shield V5.0 for Arduino UNO||OSOYOO Model-X|
|OSOYOO Basic board||OSOYOO Model-X|
|Download Arduin IDE here:
|7 zip is a free zip
utility that un-zips zip files
|Download 7zip here for free
Install latest Arduin IDE (If you have Arduin IDE version after 1.1.16, please skip this step).
Download Arduino IDE from https://www.arduino.cc/en/Main/Software?setlang=en, then install the software.
Download https://osoyoo.com/picture/2WD_Car_V2.0/code/lesson-1.zip , unzip it, you will see a folder called lesson-1
Connect board to PC with USB cable, open Arduino IDE, choose corresponding board/port for your project
Click file -> click Open -> choose code “lesson-1.ino”, load the code into Arduin, and then upload the sketch to the board.
Disconnect the car from PC, put a 9V battery into battery box (make sure polar direction is correct, otherwise it can destroy your device and cause fire hazard).
Put the car on the ground, the car should go forward 2 seconds, then go backward 2 seconds, then left turn for 2 seconds, then right turn for 2 seconds, then stop.
If the car does not move as per above mentioned result, you should check your wire connection, battery voltage(must over 7.2v).
DownLoad Url osoyoo.com