Authorized Online Retailers:

Buy from US Buy from UK Buy from DE Buy from IT Buy from FR Buy from ES Buy from JP

Packing List
Tutorial and sample projects


Raspberry Pi® is a low-cost, high-performance and tiny-sized computer developed by the Raspberry Pi Foundation. Not only has it gives people an economical platform to learn Linux programming, but it has also become a powerful tool for makers in the world.

To help beginners to make DIY projects with the powerful Raspberry Pi®, we designed this learning kit which includes various sensors, LCD display,servo, some IC chips and supporting devices such as LED,resistors, breadboard etc. Raspberry Pi® single-board computer is not included in this kit, if you don’t have one, you must buy a Raspberry Pi®  separately in order to use this kit.

We strongly believe the idea of “Learning by Doing”. That is why we designed a step-by-step tutorial which comes with this learning kit. The tutorial has 21 lessons which evolve from a typical “hello world” easy project to a complex lesson which uses Raspberry Pi to control multiple sensors and devices and make them work together.

If you have some basic C or Python programming experience, you will quickly understand Pi’s I/O programming concept  through our kit and save a lot of research time to make your own embedded DIY project.

Even if you are a novice of C or Python language, you no need worry anything. Every lesson has detailed sample code,circuit graph and tutorial video. Just follow the step-by-step instruction and spend time to learn, you will enjoy the fun of doing DIY project and eventually become a master.

Packing List

Potentiometer(10kilohm adjustable resistor) x3
LED Pack(6 x Bright White, 6 x Red, 6 x Yellow, 6 x Green) x1
Push Buttons x5
Buzzer x1
Photoresistor(light sensor) x3
DHT11 Temperature/Humidity sensor x1
SW-520D Tilt Switch Sensor Module x1
Infrared Remote Controller and Receiver(VS1838B) x1
BMP180 Barometric Pressure Module x1
I2C LiquidCrystal Display(16×2 LCD ) x1
HC-SR501 Infrared PIR Motion Sensor x1
SG90 Micro Servo Motor x1
Resistors Package (20 x 200ohm, 20 x 1Kohm, 20 x 10Kohm, 5 x 1Mohm) x1
Jumper Wires Pack(15cm M/M Jumper , 20cm F/F Jumper)
Solderless Prototype Breadboard x1
MCP3008 8-Channel 10-Bit ADC With SPI x1
T-Extension Board with 40-Pin Cable x1
8-Channel TTL Logic Level Converter x1
1 channel relay module x1

Tutorial and sample projects

Raspberry Pi Lesson 1
Get Started with Raspberry Pi

Raspberry Pi Lesson 2
Introduction of Raspberry Pi GPIO

Raspberry Pi Lesson 3
Prepare GPIO Tool-WiringPi Utility
Raspberry Pi Lesson 4
Python Light LED
Raspberry Pi Lesson 5
Flowing LED
Raspberry Pi Lesson 6
Breathing LED
Raspberry Pi Lesson 7
Raspberry Pi Button Control LED
Raspberry Lesson 8
Raspberry Pi Drive Active Buzzer
Raspberry Pi Lesson 9
Drive a Relay to Control LED
Raspberry Pi Lesson 10
Raspberry Pi SPI Ports

Raspberry Pi Lesson 11
Raspberry Pi Control the LED Brightness

Raspberry Pi Lesson 12
Raspberry Pi Drive SG90 Servo
Raspberry Pi Lesson 13
I2C 1602 LCD

Raspberry Pi Lesson 14
SW520D Tilt Switch with Raspberry Pi

Raspberry Pi Lesson 15
Raspberry Pi, Potentiometer and LCD

Raspberry Pi Lesson 16
Raspberry Pi and PIR Motion Sensor
Raspberry Pi Lesson17
Raspberry Pi Works with DHT11 Temperature and Humidity Module
Raspberry Pi Lesson 18
BMP180 Digital Pressure Sensor with Raspberry Pi
Raspberry Pi Lesson 19
IR Remote with Raspberry Pi
Raspberry Pi Lesson 20
Use Raspberry Pi + IR Remote to Control Other Devices
Raspberry Pi Lesson 21
Make IOT Home Alarm System with Pi
Raspberry Pi Lesson 22
8 Channel Logic Level Converter